I went through all codecs and put them into five basic categories:
1. JPEG range only
2. MPEG range only
3. Explicitly tagged
4. Broken (codec supports both but encoder ignores tags)
5. N/A (headerless or pseudo-formats)
Filters in category 5 remain untouched. The rest gain an explicit
assignment of their supported color ranges, with codecs in category
4 being set to MPEG-only for safety.
It might be considered redundant to distinguish between 0 (category 5)
and MPEG+JPEG (category 3), but in doing so we effectively communicate
that we can guarantee that these tags will be encoded, which is distinct
from the situation where there are some codecs that simply don't have
tagging or implied semantics (e.g. rawvideo).
A full list of codecs follows:
JPEG range only:
- amv
- roqvideo
MPEG range only:
- asv1, asv2
- avui
- cfhd
- cljr
- dnxhd
- dvvideo
- ffv1
- flv
- h261, h263, h263p
- {h263,vp8}_v4l2m2m
- huffyuv, ffvhuff
- jpeg2000
- libopenjpeg
- libtheora
- libwebp, libwebp_anim
- libx262
- libxavs, libxavs2
- libxvid
- mpeg1video, mpeg2video
- mpeg2_qsv
- mpeg2_vaapi
- mpeg4, msmpeg4, msmpeg4v2, wmv1, wmv2
- mpeg4_omx
- prores, prores_aw, prores_ks
- rv10, rv20
- snow
- speedhq
- svq1
- tiff
- utvideo
Explicitly tagged (MPEG/JPEG):
- {av1,h264,hevc}_nvenc
- {av1,h264,hevc}_vaapi
- {av1,h264,hevc,vp8,vp9,mpeg4}_mediacodec
- {av1,h264,hevc,vp9}_qsv
- h264_amf
- {h264,hevc,prores}_videotoolbox
- libaom-av1
- libkvazaar
- libopenh264
- librav1e
- libsvtav1
- libvpx, libvpx-vp9
- libx264
- libx265
- ljpeg
- mjpeg
- vc2
Broken (encoder ignores tags):
- {av1,hevc}_amf
- {h264,hevc,mpeg4}_v4l2m2m
- h264_omx
- libxeve
- magicyuv
- {vp8,vp9,mjpeg}_vaapi
N/A:
- ayuv, yuv4, y41p, v308, v210, v410, v408 (headerless)
- pgmyuv (headerless)
- rawvideo, bitpacked (headerless)
- vnull, wrapped_avframe (pseudocodecs)
There are lots of files that don't need it: The number of object
files that actually need it went down from 2011 to 884 here.
Keep it for external users in order to not cause breakages.
Also improve the other headers a bit while just at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Makes it robust against adding fields before it, which will be useful in
following commits.
Majority of the patch generated by the following Coccinelle script:
@@
typedef AVOption;
identifier arr_name;
initializer list il;
initializer list[8] il1;
expression tail;
@@
AVOption arr_name[] = { il, { il1,
- tail
+ .unit = tail
}, ... };
with some manual changes, as the script:
* has trouble with options defined inside macros
* sometimes does not handle options under an #else branch
* sometimes swallows whitespace
Unnecessary since acf63d5350adeae551d412db699f8ca03f7e76b9;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Hyper Encode uses Intel integrated and discrete graphics on one system
to accelerate encoding of a single video stream.
Depending on the selected parameters and codecs, performance gain on AlderLake iGPU + ARC Gfx up to 1.6x.
More information: https://www.intel.co.uk/content/www/uk/en/architecture-and-technology/adaptix/deep-link.html
Developer guide: https://github.com/oneapi-src/oneVPL-intel-gpu/blob/main/doc/HyperEncode_FeatureDeveloperGuide.md
Hyper Encode is supported only on Windows and requires D3D11 and oneVPL.
To enable Hyper Encode need to specify:
-Hyper Encode mode (-dual_gfx on or dual_gfx adaptive)
-Encoder: h264_qsv or hevc_qsv
-BRC: VBR, CQP or ICQ
-Lowpower mode (-low_power 1)
-Closed GOP for AVC or strict GOP for HEVC -idr_interval = 0 used by default
Depending on the encoding parameters, the following parameters may need
to be adjusted:
-g recommended >= 30 for better performance
-async_depth recommended >= 30 for better performance
-extra_hw_frames recommended equal to async_depth value
-bf recommended = 0 for better performance
In the cases with fast encoding (-preset veryfast) there may be no
performance gain due to the fact that the decode is slower than the encode.
Command line examples:
ffmpeg.exe -init_hw_device qsv:hw,child_device_type=d3d11va,child_device=0 -v verbose -y -hwaccel qsv -extra_hw_frames 60 -async_depth 60 -c:v h264_qsv -i bbb_sunflower_2160p_60fps_normal.mp4
-async_depth 60 -c:v h264_qsv -preset medium -g 60 -low_power 1 -bf 0 -dual_gfx on output.h265
Signed-off-by: galinart <artem.galin@intel.com>
Add skip_frame support to qsvenc. Use per-frame metadata
"qsv_skip_frame" to control it. skip_frame option defines the behavior
of qsv_skip_frame.
no_skip: Frame skipping is disabled.
insert_dummy: Encoder inserts into bitstream frame where all macroblocks
are encoded as skipped.
insert_nothing: Similar to insert_dummy, but encoder inserts nothing.
The skipped frames are still used in brc. For example, gop still include
skipped frames, and the frames after skipped frames will be larger in
size.
brc_only: skip_frame metadata indicates the number of missed frames
before the current frame.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Without this change, MSDK/VPL always defaults the HEVC tier to MAIN if the -level is specified.
Also, according to the HEVC specs, only level >= 4 can support High Tier.
Signed-off-by: nyanmisaka <nst799610810@gmail.com>
HEVC spec has CRA frame which allows random access with open GOP, hence
it can achieve higher compression efficiency.
Removing the entry was suggested by Andreas
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
AV_PIX_FMT_P012, AV_PIX_FMT_Y212 and AV_PIX_FMT_XV36 are used in
FFmpeg and MFX_FOURCC_P016, MFX_FOURCC_Y216, and MFX_FOURCC_Y416 are used
in the SDK
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Unset qsv_h264 and qsv_hevc's default settings. Let runtime to decide
these parameters, so that it can choose the best parameter and ffmpeg-qsv
can keep up with runtime's update.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Add "slice" intra refresh type to h264_qsv and hevc_qsv. This type means
horizontal refresh by slices without overlapping. Also update the doc.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
AV_PIX_FMT_VUYX is used in FFmpeg and MFX_FOURCC_AYUV is used in the SDK
Reviewed-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Currently AVBR is disabled and VBR is the default method if maxrate is
not specified on Linux, but AVBR is the default one if maxrate is not
specified on Windows. In order to make user experience better accross
Linux and Windows, use VBR by default on Windows if maxrate is not
specified. User need to set both avbr_accuracy and avbr_convergence to
non-zero explicitly and not to specify maxrate if AVBR is expected.
In addition, AVBR works for H264 and HEVC only in the SDK.
$ ffmpeg.exe -v verbose -f lavfi -i yuvtestsrc -vf "format=nv12" -c:v
vp9_qsv -f null -
It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add adaptive_i/b feature to hevc_qsv. Adaptive_i allows changing of
frame type from P and B to I. Adaptive_b allows changing of frame type
frome B to P.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
If qsv hwdevice is available, use the mfxLoader handle in qsv hwdevice
to create mfx session. Otherwise create mfx session with a new mfxLoader
handle.
This is in preparation for oneVPL support
The following Cflags has been added to libmfx.pc, so mfx/ prefix is no
longer needed when including mfx headers in FFmpeg.
Cflags: -I${includedir} -I${includedir}/mfx
Some old versions of libmfx have the following Cflags in libmfx.pc
Cflags: -I${includedir}
We may add -I${includedir}/mfx to CFLAGS when running 'configure
--enable-libmfx' for old versions of libmfx, if so, mfx headers without
mfx/ prefix can be included too.
If libmfx comes without pkg-config support, we may do a small change to
the settings of the environment(e.g. set -I/opt/intel/mediasdk/include/mfx
instead of -I/opt/intel/mediasdk/include to CFLAGS), then the build can
find the mfx headers without mfx/ prefix
After applying this change, we won't need to change #include for mfx
headers when mfx headers are installed under a new directory.
This is in preparation for oneVPL support (mfx headers in oneVPL are
installed under vpl directory)
This is in preparation of switching the default init-thread-safety
to a codec being init-thread-safe.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Change the default value of "bf" for hevc_qsv to -1. 8 isn't the best
choice so let MSDK to decide the number of b frames.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
To do more accurate QP control, add min/max QP control on I/P/B frame
separately to qsv encoder. qmax and qmin still work but newly-added
options have higher priority.
Signed-off-by: Yue Heng <yue.heng@intel.com>
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
libmfx 1.28 was released 3 years ago, it is easy to get a greater
version than 1.28. We may remove lots of compile-time checks if adding
the requirement for the minimal version in the configure script.
Reviewed-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Jean-Baptiste Kempf <jb@videolan.org>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
vp9, hevc, avc, mpeg2 QSV encoders inherit common list
of options (QSV_COMMON_OPTS) while bunch of options is not
actually supported by current qsv code. The only codec which
supportes everything is avc, followed by hevc, while vp9 and
mpeg2 significantly fall behind. This creates difficulties
for the users to use qsv encoders. This patch fixes options
list for encoders leaving only those which are actually
supported.
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Qsv encoder only support input P010 and nv12 format directly from system
memory. For other format, we need to upload frame to device memory and
input qsv format to encoder. Now add other system memory format support
to qsv encoder.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This structure is no longer declared in a public header,
so using an FF-prefix is more appropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add support for hevc_qsv to input RGB format frame. It will
transform frame to yuv inside MediaSDK instead of using auto
scale. Now hevc_qsv supports directly encoding BGRA and X2RGB10
format. The X2RGB10 correspond to the A2RGB20 format and BGRA
correspond to RGB4 format in MediaSDK.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add intra refresh support to hevc_qsv as well.
Add an new intra refresh type: "horizontal", and an new param
ref_cycle_dist. This param specify the distance between the
beginnings of the intra-refresh cycles in frames.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add transform_skip option to hevc_qsv. By enabling this option,
the transform_skip_enabled_flag in PPS will be set to 1.
This option is supported on the platform equal or newer than ICL.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The SDK may insert picture timing SEI for hevc and the code to set mfx
parameter has been added in qsvenc, however the corresponding option is
missing in the hevc option array
Reviewed-by: Limin Wang <lance.lmwang@gmail.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The SDK supports NalHrdConformance, RecoveryPointSEI and AUDelimiter for
hevc encoder, so we may allow user to set these coding options like as
what we did for h264_qsv encoder.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>
Given that the AVCodec.next pointer has now been removed, most of the
AVCodecs are not modified at all any more and can therefore be made
const (as this patch does); the only exceptions are the very few codecs
for external libraries that have a init_static_data callback.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Add qmax/qmin support for HEVC software bitrate control(SWBRC).
Limitations:
- RateControlMethod != MFX_RATECONTROL_CQP
- with EXTBRC ON
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>
Enables HEVC Range Extension encoding support (Linux) for 4:2:2 8/10 bit
on ICL+ (gen11 +) platform.
Restricted to linux only for now.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
All of these encoders can accept libmfx surfaces directly in a hardware
frames context, or they can accept software frames if a suitable device
is supplied to use.
Add -tile_rows and -tile_cols option to specify the number of tile rows
and columns for ICL+ (gen 11) platform.
A tile must wholly contain all the slices within it. Slices cannot cross
tile boundaries. So the slice number would be implicitly resized to the
max(nSlice, nTile).
Example:
ffmpeg -v verbose -hwaccel qsv -init_hw_device qsv=hw
-filter_hw_device hw -f rawvideo -s:v 1920x1080 -i ./input.nv12 -vf
format=nv12,hwupload=extra_hw_frames=64 -c:v hevc_qsv -tile_rows 2
-tile_cols 2 -slices 4 -y output.h265
Also dump the actual quantity of encoded tiled rows and columns in run
time.
Fix the enhancement #8400.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Anton Khirnov